Additive for caustic-free matte etching

Powder Caustic Free Matte, Acid etching system to provide a range of finish including a fine grain Matte to Satin topography.  Used prior to anodizing, the process is very effective to conceal surface defects with minimal surface aluminium removal compared to alkaline systems.

Features & Benefits  

  • Conceals substrate defects such as die lines, flow lines, and mild scratches, Ideal for Anodizing or Plating applications.
  • Effective in removing scale and oxide from aluminium that has been stored for a long period of time
  • Minimizes tendency for pitting and snow flake corrosion
  • Etches aluminium and shop smuts all in the same bath to allow for improved production throughput.
  • Produces a matte finish with significantly less aluminium removal rate than typical etch baths

Este proceso pertenece aALUMAL ETCH SERIES

For certain applications and aluminium alloys, the surface etching can enhance the final finish of the part or component by providing a given aspect (matte, satin, etc.)

Etching is also important to help conceal surface defects such as die lines, scratches or in mixed alloy aluminium components, the etching process gives a uniform surface appearance.
Etching can be accomplished with both Acid or Caustic systems.  Each ALUMAL type are blended with special surfactants to minimize fuming, or to provide a foam blanket, and the chemistries contain anti-scaling agents to keep the tank, heating equipment and other process equipment working at optimum for high throughput.  Alkaline type etch systems will dissolve more aluminium and leave behind typically more smut. Acid etch type systems tend to smut less because they dissolve both aluminium and alloy constituents at more of an equal rate. In both cases, ALUMAL Deoxidizing / Desmutting chemistries are designed to provide the proper surface conditions for subsequent processing.


Sometimes Etch systems and Etch cleaners require some modifications to enhance their performance.  The following products are available and when added to ALUMAL Cleaners, ETCH-Cleaners or ETCHES as required, they improve system performance.

ALUMAL ETCH 214 – Liquid, immersion, addition agent for alkaline cleaners and alkaline etching systems to minimize the precipitation of alumina for extending the solution life.  Also used in rack/jig stripping applications.

ALUMAL ETCH AB 212 – Liquid, immersion or spray, addition agent blend of surfactants to improve cleaning efficiency of alkaline etching or alkaline etch clean systems.

ALUMAL ETCH AB 213 – Liquid, immersion or spray, addition agent blend of surfactants and complexing agents to improve cleaning efficiency and stability of alkaline etching systems. For use with caustic soda.

ALUMAL ETCH AB 220 – Liquid, immersion, Surfactant system to provide foam blanket to reduce caustic soda fumes from alkaline etching systems, rack stripping solutions and anodizing solutions.


Realizar una consulta

Desafortunadamente, algo salió mal!

Disculpe las molestias.
Inténtelo de nuevo

Gracias por su consulta.

Responderemos en breve
Enviar otro mensaje
* - campos requeridos
Imprimir esta página
Comparte esto:
¿Cómo podemos ayudarle?
¿Cómo podemos ayudarle?
Si tiene alguna pregunta, por favor no dude en ponerse en contacto con nosotros.